Neat Cutting Oil Range

Neat Cutting Oils are used undiluted in machining operations mainly for the purposes of extending tool life, smooth surface finishing, flushing of chips and reduction of workpiece deformation. United Neat Cutting Oil series is fortified with various extreme pressure and lubricity agents to obtain the desired workpiece quality depending on the respective types of operation and workpiece material. Product series suited for light to severe operations are available. 

EDM OIL 110

Premium quality transparent Electrical-Discharge-Machine fluid that offers excellent resistance to oxidation under the typical conditions of constant air exposure and high temperatures encountered during EDM work, thereby reducing sludge formation and increasing oil life. The low viscosity allows for ready circulation of the fluid, even through narrow spark gaps, resulting in rapid dissipation of heat.

PDS

 

EDM OIL 120

Premium quality transparent Electrical-Discharge-Machine fluid offering excellent resistance to oxidation under the typical conditions of constant air exposure and high temperatures encountered during EDM work, thereby reducing sludge formation and increasing oil life. The viscosity of this oil allows for ready circulation of the fluid, even through narrow spark gaps, resulting in rapid dissipation of heat. It is also specially formulated to allow rapid settling of metal fragments before recirculation to prevent distortion of spark values and improve finish quality. This fluid is readily filterable and is non-corrosive. It is virtually colorless and odorless.

 


PDS

SDS:
SDS-EDM 120    
 

UNINET CP

UNITED UNINET CP is formulated as an all-purpose neat oil for machining of ferrous and non-ferrous metals. It is developed with a high level of lubricity and anti-wear additives. This oil is light in color so as to enable the users to observe the high precision machining operation expected of this product.

PDS

 

UNINET CS

United UNINET CS is specially developed for heavy duty machining processes such as threading, tapping, milling and gear shaping. It is particularly suitable and recommended for the harder-to-machine high alloyed steels. It is formulated with high level of synthetic lubricity as well as sulfurized ester and may not be suitable for machining of non-ferrous or yellow metals.


PDS

SDS:
SDS-UNINET CS    
 

UNINET DH

United UNINET CS is specially developed for heavy duty machining processes such as threading, tapping, milling and gear shaping. It is particularly suitable and recommended for the harder-to-machine high alloyed steels. It is formulated with high level of synthetic lubricity as well as sulfurized ester and may not be suitable for machining of non-ferrous or yellow metals.


PDS

SDS:
SDS-UNINET DH    
 

UNINET MP 25

UNINET MP 25 is a multi-purpose neat cutting oil blended with an additive that provides a synergistic combination between chlorinated, sulfurized EP and esters.

It is suitable for medium to heavy duty tapping and deep drilling processes. Formulated with highly refined mineral base stock, the combination of EP and lubricity additives provide a stable lubricating film required between the tool and metal surface. 


PDS

SDS:
SDS-MP 25    
 

UNINET TD

UNINET TD is formulated for tapping, deep hole drilling and threading of hard materials such as high nickel/chromium content stainless steel. It provides a stable lubricating film required between the tools and metal surface. The lighter viscosity assists in the flushing of work finish as well as precision.

Besides tapping operations, UNINET TD is also recommended for thread rolling and gear cutting operations on all ferrous metals.


PDS

SDS:
SDS-UNINET TD    
 

UNINET XCUT 2

UNINET XCUT 2 is chlorine-free, low misting neat cutting oil developed to meet the heavy duty demanding machining processes such as deep hole drilling, threading, tapping, milling, gear shaping and broaching. It is blended with a proprietary high polarity additive that forms a thermally stable boundary lubricating film on the metal surfaces.

PDS

SDS:
SDS-XCUT 2    
 

UNINET TS 30

UNINET TS 30 is specially formulated to meet the machining processes of small, precise components, made from SUS 420J2 series. The esterized sulfur and chlorinated EP and synthetic lubricity agent additives are selected to offer optimum performance to the heavy-duty processes like deep hole drilling and tapping at high rpm. It is fortified with unique lubricity polar substances and anti-list additives to ensure a clean working environment. Being active, it is NOT suitable for the machining of non-ferrous metals.


PDS

SDS:
SDS-TS 30    
 

UNINET 88 CP

UNINET 88 CP is recommended for heavy duty machining processes such as drilling, threading, tapping, milling, gear shaping and broaching in multi-spindle auto-lathe operations. It is formulated with high level of polar additives and active sulfur, with the objective of machining hard metals such as stainless steel. It is not suitable for machining of non-ferrous or yellow metals.


PDS

SDS:
SDS-UNINET 88 CP    
 

UNINET 211

United UNINET 211 is formulated for the high precision autholathes industry for the machining of low alloy steel, free cutting steel and non-ferrous metals. It is recommended for all metalworking applications, with the exception of very severe, stainless or heavy-duty applications.

It is free from chlorine and sulfur, and is blended with a proprietary high polarity additive that exhibits good synergistic EP/AW effects.


PDS

SDS:
SDS-UNINET 211    
 

UNINET 213

UNINET 213 is an economical neat cutting oil blended with chlorinated and sulfurized EP additives for machining applications of free cutting, stainless and alloyed steel.

It is formulated with highly refined mineral base stock for medium to heavy duty machining processes such as deep hole drilling, threading and milling in high-speed multi-spindle auto-lathe machining centers.


PDS

SDS:
SDS-UNINET 213    
 

UNINET 413

UNINET 413 is an economical neat cutting oil blended with chlorinated and sulfurized EP additives for machining applications of free cutting, stainless and alloyed steel. It is an active sulfurized product and is not suitable for non-ferrous metals like brass, copper, bronze, aluminum and magnesium alloys.

It is formulated with highly refined mineral base stock for medium to heavy duty machining processes such as deep hole drilling, threading and milling in high-speed multi-spindle auto-lathe machining centers.


PDS

SDS:
SDS-UNINET 413    
 

UNINET SFO 170

United Uninet SFO 170 is formulated primarily as honing oil for use on steel and high nickel alloys metals. It can also be used as super finishing oil in the machining/ honing of aluminum and magnesium alloys. This neat oil is designed for light to moderate duty machining operations including deep hole drilling and boring. The low viscosity at approximate 10cst/ 40C is achieved by using high quality transparent hydrotreated baseoils and ester-based lubricity additives without mixing with low flash point solvent.


PDS

SDS:
SDS - SFO 170    
 

UNINET SFO 704

UNINET SFO 704 is a very light viscosity Super Finishing Oil formulated to offer extra fluidity to ensure excellent flushing action and removal of any material which may cause stone glazing in the honing and grinding processes. It is free of sulfur and chlorinated paraffin, and is fully compliant with RoHS requirements.

It offers superior surface texture finishing capabilities when used with steels and alloy steels, aluminium as well as tungsten carbide. It can be used in honing processes for electronic, aeronautical and medical parts where precision is of utmost priority. The oil is also suitable to be used on various external and profile grinding process.


PDS

SDS:
SDS-SFO 704    
 

UNINET SFO 710

United Uninet SFO 710 is strongly recommended as the super finishing oil in the machining of aluminum, magnesium and copper alloys. This neat oil is suited for high-speed machining and is designed for light to moderate duty cutting operation. Formulated from high quality transparent baseoils and ester-based lubricity additives, it provides effective performance and is non-staining to both ferrous and non-ferrous metals. This product is free from chlorine, sulphur, nitrites, phenols and PTBBA.


PDS

SDS:
SDS-SFO 710